Unlock Huawei E1732 (Idea) 7.2 mbps usb 3G modem
Unlocking of Huawei E1732 can be done in 3 portion,Here we have to
downgrade the firmware of the modem because the idea 7.2 mbps
modem comes with customized Firmware.
Right click on you My
Computer
>Select
Properties
>Select Device Manager
Now device manager window appears,Select Ports(COM & LPT)
Refer following screenshot and select Huawei Mobile Connect – 3G Application interface
and Note down the Post No. (Here Any Port)
>Select Device Manager
Now device manager window appears,Select Ports(COM & LPT)
Refer following screenshot and select Huawei Mobile Connect – 3G Application interface
and Note down the Post No. (Here Any Port)
Step B
Now Run CDMA
Workshop.Exe From CDMA_Workshop and
Click on Main and select
the com port number in COM Settings (AT mode) which you have note down
in
above step. After that click on Connect Select button.Don’t forget to
check status !! It must shows ready if you have selected correct com
port.
Now navigate to Memory tab and click on Read button. Instantly Confirm
pop up box appears;Here Click On OK button as shown in below
screenshot.
After that on more box
appears,Here Set Last NV item to 9999
j
After that Save as box
appears, Here you have to save Nv Backup file to your desire place with
any name
in your pc Be Careful........?
Now CDMA
workshop starts reading and this will take some time approximately two
minutes,After that you will see the following message and click on OK.
Step C
: Now Run
The E1732Update_11.126.16.00.356_B427.exe from Huawei E1732
firmware E1732Update_11.126.16.00.356_B427.rar ,
Select I accept the agreement and click on next button.
i Step 2 : This
wizard will search your modem in your few seconds !! Make sure you have
closed mobile
partner 23 or Idea internet dashboard,If one of these
application
is opened then Firmware not able find your modem and shows error
Step
3: Read
and Follow the
instruction carefully and Click on Start button.
Step 4: Click On Next button.
Step 5: Now
the Application starts downloading firmware to your modem
Step 6: After completing
above process,you will get massage like update failure,Don’t worry and click on OK and Finish !!
Now you are done,Second portion of the firmware downgrading is completed
This is
the last portion of the unlocking here you have to
write Nv backup file to modem,which you have stored previously at the
starting
of the unlocking in the first portion.
Step 1:
Now Run CDMA
workshop again.Confirm the port number
again from device manager.
And
select port no Click on Main and select
the com port number in COM Settings (AT mode) which you have note down
in
above step (Here COM 12 ). After that click on Connect Select
button.Refer
the following screenshot for better understanding
Now Quickly
navigate to Memory tab and click on write
button.After that Browse and open the Nv Backup file (Here e1732.txt)
As you
click on write open button Cdma workshop instantly
starts writing this file to your modem.this process will completed in
few seconds !!
When the process will
reach at 100% you can see success message then click on OK and Close the
CDMA
workshop,It will ask for “To send Reset Command” click on No
Disconnect your modem
and Insert it again.you are Done !! Now your modem is Unlocked.After
Unlocking
your Huawei modem,Mobile partner is essential software that you
need.Because in unlocked modem default dashboard not gives maximum
flexibility.Install Mobile partner 23 and enjoy Voice and USSD
Features
No comments:
Post a Comment